CORDLESS TOOLS

Driver Drill   DB 3DL2

Drive 6.35mm (1/4”) Hex Bit Shank
Capacity: Mild Steel 5mm (1/5”)
Wood Screw 3.8 x 38mm
Machine Screw 5 mm (1/5”)
Battery Voltage 3.6V, 1.5 Ah
No Load Speed : High/Low 600/min. – 200/min.
Torque Setting 0.3-2.9Nm (3-26 in.-lbs.)
Adjustable Clutch 21 Stages Torque
Overall Length : Straight 268mm (10-35/64”)c
Angled 210mm (8-9/32”)
Weight 0.45kg (1.0 lbs.)
Standard Accessories Carrying Case

Driver Drill   DB 10DL

Drive 6.35mm (1/4”) Hex Bit Shank
Capacity: Mild Steel 18mm (23/32”)
Wood Screw 6mm x 28mm
Machine Screw 6mm (1/4”)
Battery Voltage 10.8V
No Load Speed 0-400/min.
Maximum Torque in Lock 10Nm (88in.-lbs.)
Torque Setting and Clutch 1.0-6.0Nm (9-53in.-lbs.)
Adjustable Clutch 21 Stage Torque
Overall Length 147mm (5-3/4”)
Weight 0.8kg (1.8 lbs.)
Standard Accessories Battery (BCL1015), Charger (UC10SFL), Driver Bit, Carrying Case

Driver Drill   DS 7DF

Drill Chuck 0.8-10mm
(1/32-3/8”) Keyless
Capacity: Mild Steel 10mm (1/32-3/8”)
Soft Wood 15mm (19/32”)
Wood Screw 5.1 mm x 32 mm
Machine Screw 6 mm (1/4”)
Battery Voltage 7.2V
No Load Speed 0-600/min.
Maximum Torque in Lock 8Nm (71in.-lbs.)
Torque Setting and Clutch 0.5-4Nm
(4-35in.-lbs.)
Adjustable Clutch 22 Stages Torque
Overall Length 195mm (7-11/16”)
Weight 1.2kg (2.6 lbs.)
Standard Accessories Battery (BCC715), charger, (UC7SD), Driver Bit, Carrying Case

Driver Drill   DS 9DVF3

Drill Chuck 0.8-10mm (1/32 – 3/8”) keyless
Capacity Mild steel 10mm (3/8”)
Soft Wood 21mm (13/16”)
Wood Screw 5.8mm x 45mm
Machine Screw 6mm (1/4”)
Battery Voltage 9.6V
No Load Speed : High/Low 0-840/min – 0-280/min.
Maximum Torque in Lock 22 Nm
Torque Setting and Clutch 1 – 6Nm (9 – 52in.-lbs.)
Overall Length 198mm (7-3/4”)
Weight 1.5kg (3.3 lbs)
Standard Accessories 2 Batteries (BCC915), Charger (UC18YG),Driver Bit, Carrying Case

Driver Drill   DS 10DAL

Drill Chuck 0.8-10mm (1/32-3/8”) Keyless
Capacity: Mild Steel 10mm (3/8″)
Soft Wood 29mm (1-1/8″)
Wood Screw 5.8 x 45mm (#12 x 1-25/32″)
Machine Screw 6mm (1/4″)
Battery Voltage 10.8V
No Load Speed : High/Low 0-1,300/min / 0-350/min
Max Torque Hard / Soft 36Nm (318in.-lbs.) / 14Nm (124in.-lbs.)
Torque Setting 1-4.5Nm (9-40in.-lbs.)
Overall Length 170mm (6-11/16″)
Weight * 1.0kg (2.2lbs.) with BCL 1015 or BCL 1015S / 1.2kg (2.6lbs.) with BCL 1030
Standard Accessories 2 Batteries (BCL 1015 or BCL 1015S or BCL 1030),Charger (UC 10SL2), Driver Bit, Battery Cover, Carrying Case

Driver Drill   DS 12DVF3

Drill Chuck 0.8-10mm (1/32-3/8”) Keyless
Capacity: Mild Steel 12mm (15/32”)
Soft Wood 25mm (1”)
Wood Screw 5.8mm x 63mm
Machine Screw 6mm (1/4”)
Battery Voltage 12V, 1.5 Ah
No Load Speed : High/Low 0-1,050/min. – 0-350/min.
Max Torque Hard / Soft 40Nm (354in. -lps.) / 14Nm (124in. -lps)
Torque Setting 1-6Nm (9 – 52in.-lbs)
Overall Length 221mm (8-3/4”)
Weight * 1.6kg (3.5 lbs)
Standard Accessories 2 Batteries (BCC1215), Charger (UC18YG), Driver Bit, Carrying Case

Driver Drill   DS 14DFL

Drill Chuck 0.8-10mm (1/32–3/8”) keyless
Capacity: Mild Steel 12mm (15/32”)
Soft Wood 30mm (1-3/16”)
Wood Screw 6.0mm x 75mm
Machine Screw 6mm (1/4”)
Battery Voltage 14.4V
No Load Speed : High/Low 0-1,200/min. / – 0-400/min.
Max Torque Hard / Soft 47Nm (416in.-lbs.) / 17Nm (150in.-lbs.)
Torque Setting 1 – 6Nm (9 – 53in.-lbs)
Overall Length 210mm (8-17/64”)
Weight 1.6kg (3.5 lbs)
Standard Accessories 2 Batteries (BCC1415), Charger (UC18YGL2),Driver Bit, Carrying Case

Driver Drill   DS 14DJL

Drill Chuck 2.0-13mm (5/64–1/2”) keyless
Capacity: Mild Steel 13mm (1/2”)
Soft Wood 30mm (1-3/16”)
Wood Screw 6mm x 75mm
(D x L) (#14 x 3”)
Machine Screw 6mm (1/4”)
Battery Voltage 14.4V
No Load Speed : High/Low 0-1,250/min. / 0-400/min.
Max Torque Hard / Soft 47Nm (416in.-lbs.) / 17Nm (150in.-lbs.)
Torque Setting 1 – 6Nm (9 – 53in.-lbs)
Overall Length 213mm (8-21/32”)
Weight 1.6kg (3.5 lbs)
Standard Accessories 2 Batteries (BSL1415 or BSL 1425), Charger (UC18YFSL or UC18YKSL), Driver Bit, Battery Cover, Carrying Case

Driver Drill   DS 14DL2

Drill Chuck 1.5-13mm (1/16-1/2”) keyless
Capacity: Mild Steel 13mm (1/2”)
Soft Wood 50mm (2”)
Wood Screw 8mm x 75mm
Machine Screw 6mm (1/4”)
Battery Voltage 14.4 V
No Load Speed : High/Low 0-1600/min. / 0-350/min.
Max Torque Hard / Soft 82Nm (726in.-lbs.) / 39Nm (345in.-lbs.)
Torque Setting 2-8Nm (18 – 71in.-lbs)
Overall Length 228mm (8-31/32”)
Weight 2.0kg (4.4 lbs)
Standard Accessories 2 Batteries (BCL1430 or BCL 1440), Charger (UC18YRL or UC18YMRL*3), Side Handle, Driver Bit, Carrying Case

Driver Drill   DS 18DJL

Drill Chuck 2.0-13mm (5/64–1/2”) keyless
Capacity: Mild Steel 13mm (1/2”)
Soft Wood 38mm (1-1/2”)
Wood Screw 6.8mm x 50mm
(D x L) (#16 x 2”)
Machine Screw 6mm (1/4”)
Battery Voltage 18V
No Load Speed : High/Low 0-1,250/min. / 0-450/min.
Max Torque Hard / Soft 53Nm (469in.-lbs.) / 20Nm (177in.-lbs.)
Torque Setting 1 – 6Nm (9 – 53in.-lbs)
Overall Length 213mm (8-21/32”)
Weight 1.7kg (3.8lbs.)
Standard Accessories 2 Batteries (BSL1815 or BSL 1825), Charger (UC18YFSL or UC18YKSL), Driver Bit, Battery Cover, Carrying Case

Impact Driver Drills   DV 14DJL

Drill Chuck 2.0-13mm (5/64 – 1/2”) keyless
Capacity: Brick 13mm (1/2”)
Mild Steel 13mm (1/2”)
Soft Wood 32mm (1-17/64”)
Wood Screw 8mm x 50mm
(D x L) (#20 x 2”)
Machine Screw 6mm (1/4”)
Battery Voltage 14.4V
No Load Speed : High/Low 0-1,400/min. / 0-350/min.
Max Torque Hard / Soft 50Nm (443in. -lbs) / 20Nm (177in. -lbs)
Impact Rate : High/Low 0-19,600/min. / 0-4,900/min.
Torque Setting 1-6Nm (9-53in.-lbs)
Overall Length 220mm (8-21/32”)
Weight 1.6kg (3.5lbs)
Standard Accessories 2 Battery (BSL1415 or BSL1425), Charger (UC18YFSL or UC18YKSL), Side Handle, Driver Bit, Carrying Case

Impact Driver Drills   DV 18DL2

Drill Chuck 1.5-13mm (1/16 – ½”) keyless
Capacity: Brick 16mm (5/8”)
Mild Steel 13mm (1/2”)
Soft Wood 65mm (2-9/16”)
Wood Screw 8mm x 100mm
Machine Screw 6mm (1/4”)
Battery Voltage 18V
No Load Speed : High/Low 0-1,800/min. / 0-400/min.
Max Torque Hard / Soft 92 Nm (814in. -lbs) / 42Nm (381in. -lbs)
Impact Rate : High/Low 0-27,000/min. / 0-6,000/min.
Torque Setting 2-8Nm (18-71in.-lbs)
Overall Length 242mm (9-27/32”)
Weight 2.2kg (4.8 lbs)
Standard Accessories 2 Battery (EBM1830 or BCL1840), Charger (UC18YRL), Side Handle, Driver Bit, Carrying Case

Impact Driver   WH 7DL

Capacity: Bolt 3-8mm (1/8-5/16”)
High tension bolt 3mm-6mm (1/8-1/4”)
Small screws 3-8mm (1/8-5/16”)
Drive 6.35mm (1/4”) HEX bit shank
Tightening Torque 25Nm (221in. Lbs)
Battery Voltage 7.2V, 1.5Ah
No Load Speed 0-2400/min
Full Load Speed Impact Rate 0-3000/min
Overall Length Straight/ 282mm (11-7/64”)/
L Shape 211mm (8-5/16”)
Weight 0.58kg (1.27lbs)
Standard Accessories 2 Batteries (BCL715), Charger (UC7SL), Driver bit, Carrying case

Impact Driver   WH 10DAL

Capacity: Bolt 5-12mm (3/16 – 15/32”)
High tension bolt 5-10mm (3/16 – 3/8”)
Small screws 4-8mm (5/32 – 5/16”)
Drive 6.35mm (1/4”) Hex Bit Shank
Tightening Torque 108Nm (955in.-lbs.)
Battery Voltage 10.8V
No Load Speed 0-2,700/min
Full Load Speed Impact Rate 0-3,200/min
Overall Length Straight/ 151mm (5-15/16”)
Weight 1.0kg (2.2lbs.) with BCL 1015
Standard Accessories 2 Batteries (BCL 1015), Charger (UC 10SL2), Driver Bit, Battery Cover, Carrying Case

Impact Driver   WH 10DL

Capacity: Bolt 5-12mm (3/16-15/32”)
High tension bolt 5-10mm (3/16-3/8”)
Small screws 4-8mm (5/32-5/16”)
Drive 6.35mm (1/4”) Hex Bit Shank
Tightening Torque 105Nm (930in.lbs)
Battery Voltage 10.8V
No Load Speed 0-2,300/min
Full Load Speed Impact Rate 0-3,000/min.
Overall Length Straight/ 139mm (5-15/32”)
Weight 0.9kg (2.0 lbs)
Standard Accessories Battery (BCL1015), Charger (UC10SFL), Driver Bit, Carrying Case

Impact Driver   WH 14DL2

Capacity: Bolt 6-14mm (1/4-9/16”)
High tension bolt 6-12mm (1/4-15/32”)
Small screws 4-10mm (5/32-3/8”)
Drive 6.35mm (1/4”) Hex Bit Shank
Tightening Torque 165Nm (1,460in.lbs)
Battery Voltage 14.4V
No Load Speed 0-2,600/min.
Maximum Torque in Lock 165Nm
Full Load Speed Impact Rate 0-3,200/min.
Overall Length Straight/ 162mm (6-3/8”)
Weight 1.6kg (3.5 lbs)
Standard Accessories Battery (BCL1440 or BCL1430), Charger (UC18YRL), Carrying Case

Impact Driver   WH 14DSL

Capacity: Bolt 6-16mm (1/4-5/8”)
High tension bolt 6-12mm (1/4-532”)
Drive 12.7mm (1/2”) Square Bit Shank
Tightening Torque 165Nm (1,460in.-lbs.)
Battery Voltage 14.4V
No Load Speed 0-2,000/2,600/min.
Full Load Speed Impact Rate 0-2,400/3,200/min.
Overall Length Straight/ 152mm (5-63/64”)
Weight 1.5kg (3.3lbs.)
Standard Accessories Battery (BSL 1430), Charger UC18YFSL), Carrying Case

Impact Driver   WH 18DBDL

Capacity: Bolt 6-14mm (1/4-9/16”)
High Tension Bolt 6-12mm (1/4-15/32”)
Machine screw 4-10mm (5/32-3/8”)
Square Drive 6.35mm (1/4”) HEX bit shank
Tightening Torque 160Nm (1420in. Lbs)
Battery Voltage 14.4V
No Load Speed 0-900/1400/2000 /2600/min
Impact Rate 0-3200/min
Overall Length 157mm (6-3/16”)
Weight 1.7kg (3.5lbs)
Standard Accessories 2 Batteries (BSL1830 or BCL1840), Charger (UC18YRSL),Battery cover, Carrying case

Impact Wrench   WR 14DSDL

Capacity: Bolt 10-16mm (3/8-5/8”)
High Tension Bolt 8-14mm (5/16-9/16”)
Drive 12.7mm (1/2”) Square Bit Shank
Tightening Power Mode 235Nm (2,080in.-lbs)
Torque Save Mode 130Nm (1,150in.-lbs)
Battery Voltage 14.4V
No Load Speed Power Mode 0-2,600/min.
Save Mode 0-2,000/min.
Full Load Impact Rate 0-3,200/min.
Overall Length 173mm (6-13/16”)
Weight 1.6kg (3.5 lbs)
Standard Accessories 2 Battery (BSL1430 or BSL1440 or BSL1450), Charger (UC18YFSL), Battery Cover, Carrying Case

Impact Wrench   WR 18DBDL2

Capacity: Bolt M10-M20 (3/8-3/4”)
High Tension Bolt M10-M16 (3/8-5/8”)
Square Drive 12.7mm (1/2”)
Tightening Torque 305Nm (225ft – lbs)
Battery Voltage 18V
No Load Speed High Mode 0-2,700/min
Medium Mode 0-2,000/min
Low Mode 0-1,000/min
Single Mode 0-2,700/min
Full Load Impact Rate 0-3,600/min
Overall Length 145mm (5-11/16”)
Weight 1.8kg (4.0lbs) with BSL 1860, BSL1850, BSL1830
1.5kg (3.3lbs) with BSL 1830C
Vibration Total Values Vibration Emission Values = 11.7m/s2
Standard Accessories 2 Batteries (BSL1860, BSL1850, BSL1830 or BSL1830C),Charger (UC18YFSL, UC18YSL3 or UC18YML2), Battery cover, Carrying case

Impact Wrench   WR 18DHL

Capacity: Bolt 12-22mm (15/32-7/8″)
High Tension Bolt 12-16mm (15/32-5/8″)
Drive 12.7mm (1/2″) Square Bit Shank
Tightening Torque 480Nm (4,250in.-lbs.)
Battery Voltage 18V
No Load Speed 1,500/min.
Full Load Impact Rate 2,000/min.
Overall Length 264mm (10-3/8″)
Weight 3.4kg (7.5lbs.)
Standard Accessories 2 Batteries (BCL1840 or EBM1830), Charger (UC18YRL),Carrying Case

Impact Wrench   WR 18DSHL

Capacity: Bolt 12-22mm (15/32-7/8”)
High Tension Bolt 12-16mm (15/32-5/8”)
Drive 12.7mm (1/2”) Square bit shank
Tightening Torque 480Nm (4,250in.lbs)
Battery Voltage 18V
No Load Speed 1,500/min
Full Load Impact Rate 2,000/min
Overall Length 264mm (10-3/8”)
Weight 3.4kg (7.5lbs)
Standard Accessories 2 Batteries (BSL1830 or BSL1840 or BSL1850 or BSL1860),Charger (UC18YFSL), Battery cover, Carrying case

Rotary Hammer   DH 14DSL

Capacity: Concrete 16mm (5/8”)
Mild steel 13mm (1/2”)
Wood 18mm (11/16”)
Bit shank SDS-Plus
Battery Voltage 14.4V
No Load Speed High/Low 0-750/min, 0-1500/min
Impact Rate 0-3100/min, 0-6200/min
Overall Length 276mm (10-7/8”)
Weight 2.1kg (4.6lbs)
Standard Accessories Battery (BSL1430 or BSL1440 or BSL 1450),Charger (UC18YFSL), Side handle, Depth guage, Carrying case

Rotary Hammer   DH 36DAL

Capacity: Concrete 26mm (1”)
Mild steel 13mm (1/2”)
Bit shank SDS-Plus
Battery Voltage 36V
No Load Speed High/Low 0-550/min, 0-1100/min
Impact Rate 0-2250/min, 0-4500/min
Overall Length 322mm (12-11/16”)
Weight 4.0kg (8.8lbs)
Standard Accessories Battery (BSL3626), Charger (UC36YRL), Side handle,Depth guage, Carrying case

Angle Grinder  G 14DSL

Capacity: Wheel dia 115mm (4-1/2”)
Hole dia 22.23mm (7/8”)
Spindle thread M14 X 2
Battery Voltage 14.4V
No Load Speed 9300/min
Overall Length 293mm (11-1/2”)
Weight 1.7kg (3.7lbs)
Standard Accessories Battery (BSL1440 or BSL1430), Charger (UC18YRSL),Depresed centre wheel, Wrench, Carrying case

Angle Grinder    G 18DSL

Capacity: Wheel dia 115mm (4-1/2”)
Hole dia 22.23mm-6mm (7/8”)
Spindle thread M14 x 2
Battery Voltage 18V
No Load Speed 9,100/min
Overall Length 296mm (11-21/32”)
Weight 1.8kg (4.0lbs)
Standard Accessories Batteries (BSL1830 or BSL1840 or BSL1850),Charger (UC18YFSL), Depressed Center Wheel, Wrench, Carrying case

Circular Saw   C 18DSLL

Capacity: Blade Dia 165mm (6-1/2”)
Max.Cut. 900:57mm-6mm (2-1/4”)
Depth 450:40mm-6mm (1-9/16”)
Voltage 18V
No Load Speed 3,400/min
Overall Length 365mm (14-3/8”)
Weight 3.2kg (7.1lbs)
Standard Accessories Batteries (BSL1830 or BSL1840 or BSL1850),Charger (UC18YFSL), Blade, Wrench, Carrying case

Jig Saw   CJ 18DSL

Capacity: Wood 135mm (5 – 5/16”)
Mild Steel Plate 10mm (3/8”)
Min. Cutting Radius 25mm (1”)
Drive 6.35mm (1/4”) Hex Bit Shank
Base Tilt Angle 450 Right/Left
Voltage 18V
Length of Stroke 26mm (1”)
No Load Speed 0-2,400/min
Overall Length 277mm (10-29/32”)
Weight 2.4kg (5.3lbs.)
Standard Accessories Batteries (BSL1830 or BSL1840 or BSL1850),Charger (UC18YFSL), Blade, Splinter Guard, Chip Cover,Carrying Case

Planner  P 18DSL

Capacity: Cutting Width 82mm (3 – 1/4”)
Max Cutting Depth 2mm (5/64”)
Battery Voltage 18V
No Load Speed (stroke) 16,000/min
Overall Length 326mm (12-53/64”) with BSL1830
Weight 3.2kg (7.1lbs.) with BSL1830
Standard Accessories 2 Batteries (BSL1830 or BSL1850 or BSL1860),Charger (UC18YFSL/UC18YSL3), 2 Blade, Blade Setting Gauge,Guide (with set screw), Wrench Battery Cover, Carrying Case
DRILLING TOOLS

Drills  D 6SH

Chuck Capacity 0.5-6.5mm
Capacity: Steel 6.5mm (1/4”)
Wood 9mm (3/8”)
Power Input 240W
No Load Speed 4,500/min.
Overall Length 206mm (8-1/8”)
Weight 0.9kg (2.0 lbs)
Standard Accessories Chuck Wrench, Hook, Stopper

Drills    D 10VST

Chuck Capacity 10mm (3/8”)
Capacity: Steel 10mm (3/8”)
Wood 25mm (1”)
Power Input 450W
No Load Speed 0-3,200/min.
Overall Length 227mm (8-15/16”)
Weight 176mm (6-15/16”)
Standard Accessories 1.2kg (2.6lbs)

Drills    D 13VH

Chuck Capacity 1.5-13mm (1/16-1/2”)
Capacity: Steel 13mm (1/2”)
Wood 40mm (1-9/16)
Power Input 690W
No Load Speed 0-3,000/min, 0-1,000/min
Overall Length 333mm (13-1/8”)
Weight 1.9kg (4.2lbs)
Standard Accessories Chuck Wrench, Side Handle, Depth Stopper

Impact Drills    DV 13VSS

Chuck Capacity 1.5-13mm (1/16-1/2”) Keyless
Capacity: Steel 13mm (1/2”)
Wood 13mm (1/2”)
Power Input 20mm (3/4”)
No Load Speed 550W
Overall Length 0-2.900/min.
Weight 29,000/min.
Standard Accessories 270mm (10-19/32”)

Impact Drills    Tool Kit

Tool 13 mm Impact drill DV13VSS-1 Masonary bits-4 Steel Bits (HSS)-3 Brad Points (wood drill)-2 Socket 1/4” -9 Plier (combination plier)-8 25mm Insert Bits-10
Standard Accessories

Drills    DV 16V

Chuck Capacity 1.5-13mm (1/16-1/2”)
Capacity: Concrete 16mm (5/8”)
Steel 13mm (1/2”)
Power Input 590W
No Load Speed 0-2,900/min
Full Load Impact Rate 34,500/min
Overall Length 269mm (10-19/32”)
Weight 1.5kg (3.3lbs)
Standard Accessories Side Handle, Depth Gauge, Carrying Case, Chuck Wrench

Impact Drills VTP 18

Capacity: Concrete 18mm
Steel 13mm
Wood 25mm
Power Input 640W
No Load Speed 1,050 / 1,800/min.
Full Load Impact Rate 17,800-28,600/min.
Weight 2.3kg
Rotary Hammers

Rotary Hammer    DH 24PG

Capacity: Concrete:
Drill bit
Core Bit
3.4-24mm (15/16”)
25-50mm (1” -2”)
Wood 32mm (1-1/4”)
Mild Steel 13mm (1/2”)
Power Input 730W
Bit Shank SDS-Plus
No Load Speed 0-1050/min
Full Load Impact Rate 0-3950/min
Overall Length 367mm (14-7/16”)
Weight 2.7kg
Standard Accessories Side Handle, Depth Guage, Carrying Case

Rotary Hammer  DH 24PH

Capacity: Concrete:
Drill bit
Core Bit
3.4-24mm (1/8”-15/16”)
25-50mm (1” -2”)
Wood 32mm (1-1/4”)
Mild Steel 13mm (1/2”)
Power Input 730W
Bit Shank SDS-Plus
No Load Speed 0-1050/min
Full Load Impact Rate 0-3950/min
Overall Length 367mm (14-7/16”)
Weight 2.7kg (6.0lbs)
Standard Accessories Side Handle, Depth Guage, Carrying Case

Rotary Hammer  DH 26PB

Capacity: Concrete:
Drill bit
Core Bit
3.4-26mm (1/8” -1”)
25-50mm (1” -2”)
Wood 32mm (1-1/4”)
Mild Steel 13mm (1/2”)
Power Input 830W
Bit Shank SDS-Plus
No Load Speed 0-1100/min
Full Load Impact Rate 0-4300/min
Overall Length 367mm (14-7/16”)
Weight 2.8kg (6.2lbs)
Standard Accessories Side Handle, Depth Guage, Carrying Case

Rotary Hammer  DH 26PC

Capacity: Concrete:
Drill bit
Core Bit
3.4-26mm (1/8”-1”)
25-50mm (1” -2”)
Wood 32mm (1-1/4”)
Mild Steel 13mm (1/2”)
Power Input 830W
Bit Shank SDS-Plus
No Load Speed 0-1100/min
Full Load Impact Rate 0-4,300/min
Overall Length 367mm (14-7/16”)
Weight 2.8kg (6.2lbs)
Standard Accessories Side Handle, Depth Guage, Carrying Case

Rotary Hammer  DH 28PBY

Capacity: Concrete:
Drill bit
Core Bit
3.4-28mm (1/8”-1-1/8”)
25-50mm (1” -2”)
Wood 32mm (1-1/4”)
Mild Steel 13mm (1/2”)
Power Input 850W
Bit Shank SDS-Plus
No Load Speed 0-1100/min
Full Load Impact Rate 0-4300/min
Overall Length 367mm (14-7/16”)
Weight 2.9kg (6.4lbs)
Standard Accessories Side Handle, Depth Guage, Carrying Case

Rotary Hammer  DH 28PCY

Capacity: Concrete:
Drill bit
Core Bit
3.4-28mm (1/8”-1-1/8”)
25-50mm (1”-2”)
Wood 32mm (1-1/4”)
Mild Steel 13mm (1/2”)
Power Input 850W
Bit Shank SDS-Plus
No Load Speed 0-1100/min
Full Load Impact Rate 0-4300/min
Overall Length 367mm (14-7/16”)
Weight 2.9kg (6.4lbs)
Standard Accessories Side Handle, Depth Guage, Carrying Case

Rotary Hammer  DH 40MC

Capacity: Drill bit 40mm (1-9/16”)
Core Bit 105mm (4-1/8”)
Motor Single-Phase, Series Commutator Motor
Power Source Single-Phase, 120V 60Hz
Current 10A
No Load Speed 620/min
Full Load Blow 2,800/min
Weight 7.1kg (15.6lbs)
Standard Accessories Side Handle, Carrying Case
DEMOLISHING TOOLS

Demolition Hammers  H 41MB

Power Input 930W
Full Load Impact Rate 3,000/min.
Bit Shank SDS max
Overall Length 430mm (17”)
Weight 5.1kg (11.2lbs.)
Standard Accessories Side Handle, Bull Point, Carrying Case

Demolition Hammers  H 60MC

Power Input 1,250W
Full Load Impact Rate 1,600/min
Bit Shank SDS Max
Overall Length 570mm (22-7/16”)
Weight 10.2kg (22.5lbs)
Standard Accessories Side Handle, Bull Point, Carrying Case

Demolition Hammers  PH 65A

Power Input 1,240W
Full Load Impact Rate 1,400/min
Bit Shank 30mm /(1-3/16”) Hexagon
Overall Length 642mm (25”)
Weight 15.0kg (33.0lbs)
Standard Accessories Bull Point, Side Handle, Wrenches, Oil Feeder, Carrying Case

Demolition Hammers  H 65SB2

Power Input 1,340W
Full Load Impact Rate 1,400/min
Bit Shank 30mm /(1-3/16”) Hexagon
Overall Length 726 mm (28-19/32”)
Weight 16.5kg (36.4lbs)
Standard Accessories Bull Point, Side Handle, Carrying Case

Demolition Hammers  H 90SG

Power Input 2,000W
Full Load Impact Rate 1,000/min
Bit Shank 28.5mm (1-1/8”) Hexagon
Overall Length 860mm (33-55/64”)
Weight 32.0kg (70.5lbs)
Standard Accessories Wrenches
Best in class demolition performance 512kg/30min.
Impact energy 70J
FASTENING TOOLS

Screw Driver  W 6VA4

Capacity: Drywall Screw 6mm (1/4”)
Self-Drilling Screwt 6mm (1/4”)
Bit Shank 6.35mm (1/4”) Hex
Power Input 620W
No Load Speed 0-3,000/min
Overall Length 294mm (11-19/32”)
Weight 1.4kg (3.1lbs)
Standard Accessories Driver Bit, Magnetic Bit Holder, Sub Stopper

Impact Wrenches  WR 16SE

Capacity: Ordinary Bolt 12-22mm (15/32 – 7/8″)
High Tension Bolt 12-16mm (15/32 – 5/8″)
Square Drive 1/2″ (12.7mm)
Tightening Torque 360Nm (3,180 in.-lbs.)
Power Input 370W *3
No Load Speed Maximum 1,600/min.
High 1,400/min.
Medium 1,300/min.
Low 1,100/min.
Impact Rate Maximum 1,900/min.
High 1,700/min.
Medium 1,500/min.
Low 1,300/min.
Overall Length 228mm (9”)
Weight *4 2.5kg (5.5 lbs.)
Vibration Total Values (triax vector sum) *5 Vibration emission value ah = 17.0 m/s2
Standard Accessories Uncertainty K = 1.5 m/s2

Impact Wrenches  WR 22SE

Capacity: Ordinary Bolt 14-24mm (9/16-1″)
High Tension Bolt 16-22mm (5/8-7/8″)
Tightening Torque 620Nm (5,490in.-lbs.)
Square Drive 3/4″ (19mm)
Power Input 800w
No Load Speed 1,400/min.
Impact Rate 2,000/min.
Overall Length 280mm (11″)
Weight *1 4.6kg (10.1lbs.)
Vibration Total Values Vibration emission value ah=15.2m/s2
(triax vector sum) *2 Uncertainty K=1.5m/s2
Standard Accessories Side Handle, Carrying Case

Impact Wrenches  WR 25SE

Capacity: Ordinary Bolt 22-30mm (7/8-1-3/16″)
High Tension Bolt 22-24mm (7/8-1″)
Tightening Torque 1,000Nm (8,850in.-lbs.)
Square Drive 1″ (25.4mm)
Power Input 900w
No Load Speed 1,100/min.
Impact Rate 1,500/min.
Overall Length 340mm (13-3/8″)
Weight *1 7.7kg (17.0lbs.)
Vibration Total Values Vibration emission value ah=15.2m/s2
(triax vector sum) *2 Uncertainty K=1.5m/s2
Standard Accessories Side Handle, Carrying Case
AC Brushless Motor

Rotary Hammer  DH 45ME / DH 52ME

Model DH45ME DH52ME
Capacity Drill bit 45mm 52mm
Core bit 125mm 160mm
Power Input 1,500W
Bit Shank SDS max
No Load Speed 120 – 310/min 110 – 280/min
Full Load Impact Rate 1200 – 2,950/min 1,000 – 2,400/min
Weight (including side-handle) 9.0kg 11.0kg
Standard Accessories Side Handle, Stopper, Hammer Grease A, Carrying Case

Demolition Hammer  H 45ME

Model DH45ME DH52ME
Capacity Drill bit 45mm 52mm
Core bit 125mm 160mm
Power Input 1,500W
Bit Shank SDS max
Full Load Impact Rate 1,430 – 2,850/min
Overall Length 480mm (18-29/32”)
Weight 7.0kg
Vibration Total Values Chiseling Vibration emission value ah, CHeq = 11.0m/s2 Uncertainty K = 1.5m/s2
Standard Accessories Bull Point, Side Handle, Carrying Case

Demolition Hammer      H 60ME

Model DH45ME DH52ME
Capacity Drill bit 45mm 52mm
Core bit 125mm 160mm
Power Input 1,500W
Bit Shank SDS max
Full Load Impact Rate 1,500 – 2,100/min
Overall Length 585mm (23-1/32”)
Weight 11.6kg
Vibration Total Values Equivalent Chiseling Value Vibration emission value ah, CHeq = 11.0m/s2 Uncertainty K = 1.5m/s2
Standard Accessories Side Handle, Stopper, Hammer Grease A, Carrying Case
GRINDING TOOLS

Mini Grinders  G 10SS2

Capacity Wheel Dia 100mm (4”)
Hole Dia 16mm (5/8”)
Spindle Thread M10 x 1.5
Power Input 600W
No Load Speed 11,500/min: 220-240V
Overall Length 254mm (10”)
Weight 1.7kg (3.8lbs)
Standard Accessories Side Handle, Wrench

Mini Grinders  PDA-100M

Capacity Wheel Dia 100mm (4”)
Hole Dia 16mm (5/8”)
Spindle Thread M10 x 1.5
Power Input 715W
No Load Speed 12,000/min
Overall Length 260mm
Weight 1.5kg (3.3lbs)
Standard Accessories Depressed Center Wheel, Wrench

Mini Grinders  G 10SR4

Capacity Wheel Dia 100mm (4”)
Hole Dia 16mm (5/8”)
Spindle Thread M10 x 1.5
Power Input 730W
No Load Speed 10,000/min
Overall Length 258mm (10-1/8”)
Weight 1.7kg (3.8lbs)
Standard Accessories Side Handle, Wrench

Mini Grinders  G 13SR4

Capacity Wheel Dia 125mm (5″)
Hole Dia 22.23mm (7/8″)
Spindle Thread M14 x 2
Power Input 730W
No Load Speed 10,000/min.
Overall Length 258mm (10-1/8″)
Weight 1.8kg (4.0lbs.)
Standard Accessories Side Handle, Wrench

Mini Grinders  G 13SN

Capacity Wheel Dia 125mm (5″)
Hole Dia 22.23mm (7/8″)
Spindle Thread M14 x 2
Power Input 840W
No Load Speed 10,000/min
Overall Length 259mm (10-3/16″)
Weight 1.6kg (3.5lbs.)
Standard Accessories Side Handle, Depressed Center Wheel, Wrench

Mini Grinders  G 13SW

Capacity Wheel Dia 125mm (5″)
Hole Dia 22.23mm (7/8″)
Spindle Thread M14 x 2
Power Input 1,200W
No Load Speed 12,000/min.
Overall Length 277mm (10-29/32″)
Weight 2.3kg (5.07lbs.) *4
Standard Accessories Side Handle, Depressed Center Wheel, Wrench

Mini Grinders  G 13SB3

Capacity Wheel Dia 125mm (5”)
Hole Dia 22.23mm (7/8”)
Spindle Thread M14 X 2
Power Input 1,300W
No Load Speed 11,000/min
Overall Length 283mm (11-9/46”)
Weight 1.9kg (4.2 lbs)
Standard Accessories Side Handle, Depressed Centre Wheel, Wrench

Mini Grinders  G 13SC2

Capacity Wheel Dia 125mm (5”)
Hole Dia 22.23mm (7/8”)
Spindle Thread M14 X 2
Power Input 1200W
No Load Speed 10000/min
Overall Length 391mm (15-13/32”)
Weight 2.8kg (5.9 lbs)
Standard Accessories Side Handle, Depressed Centre Wheel, Wrench

Large Angle Grinders  G 15SA2

Capacity Wheel Dia 150mm (6”)
Hole Dia 22.23mm (7/8”)
Spindle Thread M14 x 2
Power Input 1,200W
No Load Speed 8,500/min
Overall Length 391mm (15-13/32”)
Weight 2.8kg (5.9lbs)
Standard Accessories Side Handle, Depressed Center Wheel, Wrench

Large Angle Grinders  G 18ST

Capacity Wheel Dia 180mm (7″)
Hole Dia 22.23mm (7/8″)
Spindle Thread M14 x 2
Power Input 2,000W
No Load Speed 8,500/min.
Overall Length 469mm (18-1/2″)
Weight 4.9kg (10.8lbs.)
Standard Accessories Side Handle, Wrench

Large Angle Grinders  G 18SH2

Capacity Wheel Dia 180mm (7”)
Hole Dia 22.23mm (7/8”)
Spindle Thread M14 x 2
Power Input 2,000W
No Load Speed 8,500/min
Overall Length 463mm (18-7/32”)
Weight 4.3kg (9.5lbs)
Standard Accessories Side Handle, Wrench

Large Angle Grinders  G 18SW2

Capacity Wheel Dia 180mm (7″)
Hole Dia 22.23mm (7/8″)
Spindle Thread M14 x 2
Power Input 2,200W
No Load Speed 8,500/min.
Overall Length 469mm (18-1/2″)
Weight 4.9kg (10.8lbs.)
Standard Accessories Side Handle, Wrench

Large Angle Grinders  G 18SE3

Capacity Wheel Dia 180mm (7”)
Hole Dia 22.23mm (7/8”)
Spindle Thread M14 x 2
Power Input 2,300W
No Load Speed 8,500/min
Overall Length 478mm (18-13/16”)
Weight 5.0kg (11.0lbs)
Standard Accessories Side Handle, Wrench

Large Angle Grinders  G 18MR

Capacity Wheel Dia 180mm (7”)
Hole Dia 22.23mm (7/8”)
Spindle Thread M14 x 2
Power Input 2,400W
No Load Speed 8,500/min
Overall Length 492mm (19-3/8”)
Weight 5.4kg (11.9lbs)
Standard Accessories Side Handle, Wrench

Large Angle Grinders  G 18SEY

Capacity Wheel Dia 180mm (7”)
Hole Dia 22.23mm (7/8”)
Spindle Thread M14 x 2
Power Input 2,600W
No Load Speed 8,500/min
Overall Length 500mm (19-11/16”)
Weight 5.1kg (11.2lbs)
Standard Accessories Side Handle, Wrench

Large Angle Grinders  G 23SF2

Capacity Wheel Dia 230mm (9”)
Hole Dia 22.23mm (7/8”)
Spindle Thread M14 x 2
Power Input 2,000W
No Load Speed 6,600/min
Overall Length 463mm (18-7/32”)
Weight 4.3kg (9.5lbs)
Standard Accessories Side Handle, Wrench

Large Angle Grinders  G 23ST

Capacity Wheel Dia 230mm (9″)
Hole Dia 22.23mm (7/8″)
Spindle Thread M14 x 2
Power Input 2,000W
No Load Speed 6,600/min.
Overall Length 469mm (18-1/2″)
Weight 5.1kg (11.2lbs.)
Standard Accessories Side Handle, Wrench

Large Angle Grinders  G 23SW2

Capacity Wheel Dia 230mm (9″)
Hole Dia 22.23mm (7/8″)
Spindle Thread M14 x 2
Power Input 2,200W
No Load Speed 6,600/min.
Overall Length 469mm (18-1/2″)
Weight 5.1kg (11.2lbs.)
Standard Accessories Side Handle, Wrench

Large Angle Grinders  G 23SC3

Capacity Wheel Dia 230mm (9”)
Hole Dia 22.23mm (7/8”)
Spindle Thread M14 X 2
Power Input 2300W
No Load Speed 6600/min
Overall Length 478mm (18-13/16”)
Weight 5.0kg (11.0lbs)
Standard Accessories Side Handle, Wrench

Die Grinders  GP 2S2

Capacity Wheel Dia 6mm (or 1/4”)
Hole Dia 25mm (1”)
Power Input 520W
No Load Speed 29,000/min
Overall Length 359.4mm (14-5/32”)
Weight 1.7kg (4.0lbs)
Standard Accessories Side Handle, Wrenches

Die Grinders  GP 3V

Capacity Wheel Dia 6mm (or 1/4”)
Hole Dia 25mm (1”)
Power Input 760W
No Load Speed 7,000 – 29,000/min
Overall Length 406mm (16”)
Weight 1.8kg (4.0lbs)
Standard Accessories Side Handle, Collet Check, Wrenches
POLISHING/SANDING TOOLS

Disc Sander  S 15SB

Capacity Sanding Disc 150mm (6”)
Spindle Thread M16 x 2
Power Input 705W
No Load Speed 4,500/min
Overall Length 194mm
Weight 2.0kg (4.4lbs)
Standard Accessories Side Handle, Rubber Pad, Sanding Paper, Wrench

Sander Polisher SAT  SAT 180

Capacity Sanding Disc 180mm (7”)
Wool Bonnet 180 mm (7”)
Spindle Thread M14 x 2 or U5/8-11
Power Input 750W
No Load Speed 1,900/min. / 3,400/min.
Overall Length 395mm (15-9/16”)
Weight 2.9kg (6.4lbs)
Standard Accessories Side Handle, Rubber Pad, Sanding Discs, Wrenches

Sander Polisher  SP 18VA

Capacity Sanding Disc 180mm (7”)
Wool Bonnet 180mm (7”)
Spindle Thread M14 x 2 or U5/8-11
Power Input 1,250W
No Load Speed 0-3,400/min
Overall Length 415mm (16-19/36”)
Weight 2.8kg (6.2lbs)
Standard Accessories Loop Handle, Rubber Pad, Wool Bonnet, Sanding Disc, Wrench

Orbital Sanders  FSV 10SA

Capacity Pad Size 92 x 184mm (3-5/8 X 7 -1/4”)
Spindle Thread 2mm (3/32”)
Power Input 180W
No Load Speed Spindle 10,000/min
Orbit 20,000/min
Overall Length 184mm (7-1/4”)
Weight 1.3kg (2.9lbs)
Standard Accessories Sanding Papers, Dust Bag, Punch Plate

Orbital Sanders  SV 12SG

Capacity Pad Size 110 x 100mm (4-1/2 X 4”)
Spindle Thread 200W
Power Input 1.5mm (1/16”)
No Load Speed Spindle 14,000/min
Orbit 28,000/min
Overall Length 137mm (5-3/8”)
Weight 1.1kg (2.4lbs)
Standard Accessories Sanding Paper, Dust Bag

Random Orbital Sanders  SV 13YA

Capacity Sanding Pad 125mm (5”)
Spindle Thread 230W
Power Input 3.2mm (1/8”)
No Load Speed 7,000 – 12,000/min
Overall Length 145mm (5-11/16”)
Weight 1.4kg (3.1lbs)
Standard Accessories Sanding Paper, Dust Bag

Random Orbital Sanders  SV 13YB

Capacity Sanding Pad 125mm (5”)
Spindle Thread 230W
Power Input 3.2mm (1/8”)
No Load Speed 12,000/min
Overall Length 145mm (5-11/16”)
Weight 1.4kg (3.1lbs)
Standard Accessories Sanding Paper, Dust Bag

Belt Sander  SB 8V2

Capacity Belt Size 76 x 533mm (3 x 21”)
Power Input 1,020W
No Load Speed 250 – 450m/min.
Overall Length 318mm (12-33/64”)
Weight 4.3kg (9.7lbs)
Standard Accessories Sanding Belt, Dust Bag
SAW ING TOOLS

Circular Saw  C 7SS

Capacity Blade Dia 190mm (7-1/2”)
Max Cut Depth 90° 68mm (2-11/16”)
45° 46mm (1-7/8”)
Power Input 1,050W
No Load Speed 5,500/min
Overall Length 291mm (11-15/32”)
Weight 3.4kg (7.5lbs)
Standard Accessories Blade, Guide, Wrench

Circular Saw  C 7SB2

Capacity Blade Dia 185mm (7-1/4”)
Max Cut Depth 90° 60mm (2-3/8”)
45° 47mm (1-27/32”)
Power Input 1,710W
No Load Speed 5,800/min
Overall Length 305mm (12”)
Weight 4.6kg (10.1lbs)
Standard Accessories Blade, Wrench, Carrying Case

Circular Saw  C 9SA3

Capacity Blade Dia 235mm (9-1/4”)
Max Cut Depth 90° 86mm (3-3/8”)
45° 65mm (2-9/16”)
Power Input 2,000W
No Load Speed 5,200/min
Overall Length 397mm (15-5/8”)
Weight 7.0kg (15.4lbs)
Standard Accessories Blade, Side Handle, Guide, Bolt, Wrench, Adapter for Dust Collector, Short Lever

Slide Compound Miter Saw  C 8FSE

Capacity Blade Dia 216mm (8-1/2”)
HxW) Cross Cut : 0° 65 x 312mm, 75 x 262mm
(HxW) Miter Cut : 45° 65 x 220mm, 75 x 185mm
(HxW) Bevel Cut : 45° 45 x 312mm
Compound Miter 45° & Bevel 45° 45 x 220mm
Power Input 1,050W
No Load Speed 5,500/min
Miter Angle: Right/Left 0 – 57° , – 0 – 45°
Bevel Angle: Right/Left 0 – 5°, – 0 – 48°
Positive Miter Angle Stop 0, 15, 22.5, 31.6 and 45°
Dimensions 555 x 790 x 485mm
Weight 14kg
Standard Accessories Blade, Dust Bag, Vise Ass’y, Wrench

Slide Compound Miter Saw  C 8FSHE

Capacity Blade Dia 216mm (8-1/2”)
HxW) Cross Cut : 0° 65 x 312mm, 75 x 262mm
(HxW) Miter Cut : 45° 65 x 220mm, 75 x 185mm
(HxW) Bevel Cut : 45° 45 x 312mm
Compound Miter 45°  & Bevel 45° 45 x 220mm
Power Input 1,050W
No Load Speed 5,500/min
Miter Angle: Right/Left 0 – 57° , – 0 – 45°
Bevel Angle: Right/Left 0 – 5°, – 0 – 48°
Positive Miter Angle Stop 0, 15, 22.5, 31.6 and 45°
Dimensions 555 x 790 x 485mm
Weight 14.5kg
Standard Accessories Blade, Dust Bag, Vise Ass’y, Wrench

Compound Miter Saw  C 10FCE2

Capacity Blade Dia 255mm (10”)
HxW) Cross Cut : 0° 59 x 114mm or 89 x 101mm
(HxW) Miter Cut : 45° 59 x 102mm or 89 x 70mm
(HxW) Bevel Cut : 45° 59 x 89mm or 89 x 54mm
Compound Miter 45° & Bevel 45° 41 x 144mm
Power Input 41 x 102mm
No Load Speed 1,520W
Miter Angle: Right/Left 5,000/min
Bevel Angle: Right/Left 0 – 52°, – 0 – 52°
Positive Miter Angle Stop 0 – 45°
Dimensions 0, 15, 22.5, 31.6 and 45°
Weight 460 x 628 x 561mm
Standard Accessories 11.9kg

Compound Miter Saw  C 12FCH

Capacity Blade Dia 305mm (12”)
HxW) Cross Cut : 0° 61.5 x 200mm or 96 x 155mm
(HxW) Miter Cut : 45° 61.5 x 140mm
(HxW) Bevel Cut : 45° 61.5 x 120mm
Compound Miter 45°  & Bevel 45° 40 x 200mm
Power Input 40 x 140mm
No Load Speed 1,520W
Miter Angle: Right/Left 4,000/min
Bevel Angle: Right/Left 0 – 52° -. 0 – 52°
Positive Miter Angle Stop 3° right – 48° left
Dimensions 0, 15, 22.5, 31.6 and 45°
Weight 625 x 775 x 610mm
Standard Accessories 19.0kg

Compound Miter Saw  C 12LCH

Capacity Blade Dia 305mm (12”)
HxW) Cross Cut : 0° 61.5 x 200mm or 96 x 155mm
(HxW) Miter Cut : 45° 61.5 x 140mm
(HxW) Bevel Cut : 45° 61.5 x 120mm
Compound Miter 45° & Bevel 45° 40 x 200mm
Power Input 40 x 140mm
No Load Speed 1,520W
Miter Angle: Right/Left 4,000/min
Bevel Angle: Right/Left 0 – 52° -, 0 – 52°
Positive Miter Angle Stop 3° right – 48° left
Dimensions 0, 15, 22.5, 31.6 and 45°
Weight 625 x 775 x 610mm
Standard Accessories 19.5kg

Jig Saws  FCJ 65V3

Capacity Blade Dia 65mm (2-5/8”)
Mild Steel Plate 6mm (1/4”)
Min.Cutting Radius 25mm (1”)
Base Tilt angle 45° Right / Left
Power Input 400W
Length of Stroke 18mm (45/64”)
No Load Speed (stroke) 0-3,000/min
Overall Length 197mm (7-3/4”)
Weight 1.5kg (4.2lbs)
Standard Accessories Blade, Splinter Guard, Chip Cover Wrench

Jig Saws  CJ 90VST

Capacity Blade Dia 90mm (3-1/2”)
Mild Steel Plate 8mm (5/16”)
Min.Cutting Radius 25mm (1”)
Base Tilt angle 45° Right / Left
Power Input 705W
Length of Stroke 20mm (3/4”)
No Load Speed (stroke) 850 – 3,000/min
Overall Length 228mm (9”)
Weight 2.2kg (4.9lbs)
Standard Accessories Blade, Wrench, Carrying Case

Jig Saws  CJ 160V

Capacity Wood 160mm (6-19/64”)
Aluminium 20mm (25/32”)
Mild Steel Plate 10mm (25/64”)
Min. Cutting Radius 25mm (1”)
Power Input 800W
Length of Stroke 26mm (1-1/32”)
No Load Speed (stroke) 800 – 2,800/min
Overall Length 249mm (9-51/64”)
Weight 2.5kg (5.5lbs)
Standard Accessories Blade (No.41, No.42, No. 123X), Splinter Guard, Sub Base, Chip Cover, Dust Collection Adapter, Wrench, Carrying Case

Reciprocating Saw  CR 13V2

Capacity Pipe 130mm (5”)
Steel Plate 19mm (3/4”)
Wood 300mm (17-13/16”)
Power Input 1,010W
Length of Stroke 29mm (1-1/8”)
No Load Speed (stroke) 0-2,800/min
Overall Length 435mm (17-1/8”)
Weight 3.3kg (7.3lbs)
Standard Accessories Blade, Wrenches, Carrying Case

Chain Saw  CS 40Y

Voltage
Power Input 2,000W
No Load Chains Speed 14.5 m/s
Chain Pitch 3/8’’
Chain Gauge 0.05”
Guide Bar Length 400 mm (16”)
Type of Guide Bar Sprocket Nose
Oil tank capacity 150ml
Dimensions (LxWxH) 490 x 217 x 220mm (19-19/64” x 8-33/64” x 8-21/32”)
Dry Weight 5.5 kg (12.1lbs.)
Standard Accessories Guide Bar, Saw Chain, Plug Clip, Chain Case
CUTTING TOOLS

Cutters  CM 4ST

Capacity Wheel Dia 110mm (4 x 3/8”)
Max Cut Depth 34mm (1-3/8”)
Power Input 1,300W
No Load Speed (stroke) 13,000/min
Overall Length 214mm (8-27/64”)
Weight 2.9kg (6.4lbs)
Standard Accessories Wrench

Cutters  CM 4SB2

Capacity Wheel Dia 110mm (4-3/8”)
Max Cut Depth 34mm (1-3/8”)
Cut Depth Per one cutting 20mm (25/32”)
Power Input 1,320W
No Load Speed (stroke) 11,500/min
Overall Length 204mm
Weight 2.8kg (6.2lbs)
Standard Accessories Water Plug, Rubber Connector, Wrenches, Vinyl Hose

Cutters  CM 12Y

Capacity Wheel Dia 305mm (12”)
Max Cut Depth 100mm (4”)
Cut Depth Per one cutting 50mm (1-31/32”)
Power Input 2,400W
No Load Speed (stroke) 5,000/min
Overall Length 22mm (7/8”)
Weight 633mm (24-15/16”) 11.5kg (25.3lbs)
Standard Accessories Dust Collection Adapter, Eye Protector

Cut-Off Machines  CC 14STD

Capacity: Cut-off Wheel Dia 355mm (14”)
Power input 2,200W
No Load Speed 3,800/min
Max Working Peripheral Speed 4,800m/min
Dimensions (LxWxH) 590 X 300 X 640mm (23-7/32”) x (11-13/16”) x (25-3/32”)
Weight 17.0kg (37.4lbs)
Standard Accessories Cut-off wheel, Wrench
PLANING / ROUTING TOOL

Planer  P 20ST

Capacity Cutting width 82mm (3-1/4”)
Max Cut Depth 1.5mm (1/16”)
Power Input 580W
No Load Speed (stroke) 17,000/min
Dimensions 590 (23-7/32”) X 300(11-13/16”) x 650(25-19/32”)
Weight 2.5kg (5.5lbs)
Standard Accessories Blades, Bladesetting Guage, Wrench

Routers  M 12SA2

Capacity Collet Chuck 12mm (or 1/2”)
Stroke 65mm (2-9/16”)
Power Input 1,700W
No Load Speed 22,000/min
Weight 6.2kg (13.7lbs)
Standard Accessories 2 Collect Chucks, Centering Gauge, Straight Guide, Template Guide, Template Guide Adapter, Dust Guide, Dust Guide Adapter, Wrench

Routers  M 12SC

Capacity Collet Chuck 6 X12mm
Stroke 65mm (2-9/16”)
Power Input 900W
No Load Speed 25,000/min
Weight 3.3kg
Multi Tool

Multi Tool  CV 350V

Power Input 350W
Oscillation Frequency Standard mode (Dial 1-5) 6,000 – 20,000/min
Oscillation Frequency AUTO Mode (Dial A) 15,000 ⇔ 20,000/min
Oscillation Angle 3.2°
Overall Length 280 mm (11 – 1/64″)
Weight 1.5kg (3.3lbs.)
Standard Accessories* Pad (MU93D), Sanding Papers, Blades, Tool Box, Carrying Case
MISCELLANEOUS TOOLS

Digital Laser Meter  UG 50Y

Power Source 9V Battery x 1
Measuring Modes Distance, Continuous, Area, Volume, Side
Measurable Range 0.5 – 50m (1.64 – 164ft)
Minimum Measurement unit 1mm (0.039”)
Measuring Accuracy(repeated) ±1.5mm (1/16”)
Measuring Time 0.5 – 3.0 sec
Laser Diode 650nm. <1mW
Laser Class Class II
Splash & Dust Proof Protection Class Ip54*
Operating Temperature Range 0 – 40°c
Dimesions (H x W x D) 111 x 58 x 32mm (4-3/8 x 2-9/32 x 1-17/64”)
Weight (including battery) 0.14kg (0.3lbs)
Standard Accessories Soft Case, Strap, Battery

Shear  CE 16SA

Capacity Steel 1.6mm (16ga)
Stainless 1.2mm (18ga)
Min. Cutting Radius 25mm (1”)
Power Input 400W
No Load Speed (stroke) 4,700/min
Overall Length 250mm (9-7/8”)
Weight 1.7kg (3.7lbs)
Standard Accessories Blade Set, Thickness Gauge, Hex.Bar Wrench

Nibbler  CN 16SA

Capacity Steel 1.6mm (16ga)
Stainless 1.2mm (18ga.)
Cutting Width 5mm (3/16”)
Min. Cutting Radius 40mm (1-9/16”)
Power Input 400W
No Load Speed (stroke) 2,300/min
Overall Length 250mm (9-7/8”)
Weight 1.6kg (3.5lbs)
Standard Accessories 2 Hex. Bar Wrenches

Blower  RB 40SA

Capacity Air Pressure 5.5kPa
Air Volume Flow 3.8m3/min
Power Input 550W
No Load Speed (stroke) 16,000/min
Overall Length 447mm (17-19/32”)
Weight 1.7kg (3.7lbs)
Standard Accessories Nozzle, Dust Bag

Dust Extractor/Vacuum Cleaner  RP 250 YE

Capacity Air Pressure 22kPa
Air Volume Flow 3.5 m3/min
Air Volume Flow Stainless Steel
Tank Effective Dust Dry 25L
Volume: Wet 22L
Power Input 1,140 W
Insulation Grounded
Interlocking Electric Outlet 100 to 2,400 W (100 to 1, 700W for UK/100 to 1,200W for Australia)
Dimensions (W x D x H) 390mm x 469mm x 550mm (15-3/8’’x18-15/32’’x21-21/32’’
Weight 9.4kg (20.7lbs.)
Standard Accessories Hose (id 38mm x 3m long), Pipe, Joint Handle, Master Nozzle, Crevice Nozzle, Wer Nozzle, Round Brush Nozzle, Joint (D), Adapter, Poly Pouch, Pipe Holder

Mixer  UM 16VST

Capacity: Max Strrer Dia. 160mm (6-1/4”)
Power Input 1,500 W
Tool Spindle Thread M14
No Load Speed: High/Low 300-650/min. / 150-300/min.
Overall Length 335mm
Weight 5.6kg (12.3lbs.)
Standard Accessories Stirrer, Extension Bar, Wrenches

Heat Gun  RH 600T

Voltage 220V-240V
Power Input 2,000W
Capacity Wind Volume 0.25/0.5m3/min (2-stage switch)
Wind Temperature 45/600&degC (2-stage switch)
Wind Temperature(when the cooling button is used) 50°C
Overall Length 245mm (9-21/32”)
Weight 0.57Kg (1.26lbs)

Heat Gun  RH 650V

Voltage 220V-240V
Power Input 2,000W
Capacity Wind Volume 0.25/0.5m3/min (5-stage switch)
Wind Temperature 50/650OC (in increments of 100C)
Overall Length 245mm (9-21/32”)
Weight 0.79Kg (1.74lbs)
Standard Accessories Nozzle (round), Nozzle (flat), Nozzle (curved surface), Nozzle (glass protector), scraper (with grip) and carrying case

Pneumatic Coil Nailer  NV 90AG

Driving System Piston Reciprocating Action
Operating Pressure Range 5 – 8.5kgf/cm2
In Gauge Pressure (70 – 120psi)
Driving Speed 3 nails / sec.
Loading Capacity 200 – 300 nails
Air Inlet NPT 3/8 Thread
Dimensions (L x H) 336 x 332mm
Weight (13-1/14” x 13-1/16”)
Standard Accessories 3.5 kg

Compressor  EC 68

Type of Motor Induction
Tank Capacity 24 Ltrs
Air Pressure 8 Bar
Power Input 1.5 hp
Weight 28 kg

Drill Press  B 16RM

Capacity Chuck 16mm (5/8”)
Power input 750W
Laser ClassII, Max output <1mW
No Load Speed 250/340/510/ 600/ 650/990/ 1550/ 1620/1630/2620/3100/min
Spindle Taper JT3
Swing 380mm (15”)
Spindle Travel 85mm( 3-1/8”)
Table Size 336mm X 336mm
Table Tilt 450 right or left
Base 279mm X 518mm
Overall Height 1618mm (63-1/4”)
Weight 75Kg (165lbs)

Pressure Washer  AW 100

Voltage (by areas) Single-phase AC 50/60Hz Voltage 220V to 240V
Power Input 1,400W
Max Discharge Pressure 7.0MPa (1MPa: 10.2 kgf/cm2)
Max Permissible Pressure 10.0MPa
Max Feed Pressure 0.7MPa
Max Water Discharge 5.5L/min.
Permissible Temperature 40°C or less
Water Feeding Method Faucet connection type
Dimensions (L x W x D) 305 x 245 x 465mm (12″ x 9-5/8″ x 18-1/4″)
Weight 5.4kg (11.9lbs.)
Standard Accessories Trigger gun, High-pressure hose (5m), Variable nozzle, Detergent bottle nozzle, Water feed connector, Nozzle cleaner pin,Cord holder, Gun holder, Handle (with 2 attachment screws)

Pressure Washer  AW 130

Voltage (by areas) Single-phase AC 50/60Hz Voltage 220V to 240V
Power Input 1,600W
Max Discharge Pressure 9.0MPa (1MPa: 10.2 kgf/cm2)
Max Permissible Pressure 13.0MPa
Max Feed Pressure 0.7MPa
Max Water Discharge 6.0L/min.
Permissible Temperature 40°C or less
Water Feeding Method Faucet connection type
Dimensions (L x W x D) 325 x 260 x 790mm (12-3/4″ x 10-1/4″ x 31-1/8″)
Weight 8.3kg (18.9lbs.)
Standard Accessories Trigger gun, High-pressure hose (10m), Variable nozzle, Turbo nozzle, Detergent bottle nozzle, One-touch joint (black)(For use with the strainer hose), Water feed connector, Nozzle cleaner pin,Cord holder, Handle (with 4 attachment screws)

Pressure Washer  AW 150

Voltage (by areas) Single-phase AC 50/60Hz Voltage 220V to 240V
Power Input 2,000W
Max Discharge Pressure 11.0MPa (1MPa: 10.2 kgf/cm2)
Max Permissible Pressure 15.0MPa
Max Feed Pressure 0.7MPa
Max Water Discharge 6.67L/min.
Permissible Temperature 40°C or less
Water Feeding Method Faucet connection type
Dimensions (L x W x D) 425 x 345 x 905mm (16-3/4″ x 13-5/8″ x 35-5/8″)
Weight 12.4kg (27.3lbs.)
Standard Accessories Trigger gun, High-pressure hose (10m), Variable nozzle (with pressure adjuster), Turbo nozzle, Detergent bottle (stored inside the unit), One-touch joint (black) (For use with the strainer hose), Water feed connector, Nozzle cleaner pin, Gun holder, Hose handle, Gun support (with 1 attachment screw)
ACCESSORIES

Start typing and press Enter to search